Table of Contents
Advertisement
4. How to configure
1) Virtual serial port driver installation
- Connect Bluetooth main (master) to USB port of PC
- Found New Hardware Wizard detects new hardware by Plug and Play and select Include this
location in the search. Then select the folder which contains
- When installation completes, Found New Hardware Wizard will detects new hardware once again.
Then repeat the above setting one more time.
- Refer to Attachment
2) Virtual serial port driver setting
- Check Virtual port and apply the setting as below.
- Start > Control Panel > System > Hardware > Device Manager
- Select USB Serial Port under Port (COM x: Port number varies from your PC condition) and change
the Properties.
- Port Setting:
19200, 8, none, 1, hardware
- Advanced Setting:
- Make sure not to change COM Port Number (When changes, select the open port)
- Refer to Attachment 2.
3) Bluetooth & Printer dip switch setting
- Set Maser/Slave, Baud rate and handshaking by Dip switch.
-
19200
bps,
DTR/DSR (RTS/CTS)
PC, Bluetooth master, Bluetooth slave, Printer)
- Refer to Attachment 3.
4) Bluetooth slave setting
- Connect Bluetooth main (master/slave) to USB (or Serial) port of PC.
- Execute
BluetoothConfig_V2.x.exe
- Select the virtual port
a) USB port: Select the virtual port (COM x) of step 2).
b) Serial (RS-232C): Select the COM x connected.
- Configure Adapter setting:
- Disconnect the Bluetooth main (master/slave) from the PC, assemble it with the Cover_BT, and
connect it to the printer.
- Refer to Attachment 4.
V1.00
(required only when you use the USB port on the PC)
1.Virtual serial port driver installation.
(required only when you use the USB port on the PC)
4096, 4096, 16, 0, 0,
Check in
"Serial Enumerator"
(In case of Win 98, You cannot see "miscellaneous option" Just ignore)
Virtual serial port setting
(Be sure that communication condition must be all the same for
Dip switch setting
from the downloaded
slave, 19200, hardware
Bluetooth slave Setting
WWW.SAMSUNGMINIPRINTERS.COM
(Refer to Attachment 3. Dip switch setting)
VirtualCOM_R9032148.
and
"Serial Printer" .
files.
5
Advertisement
Table of Contents
