Installation; Front View Of Energize Iii Or Energize Xpc; Acceptable Mounting Angles - Hayes ENERGIZE III Installation Manual

Installation

!
Anchor Holes
Pendulum
Lever Arm
Figure 1 - front view of Energize III or Energize XPC
Mounting angle and mounting direction
Mounting angles between –35 and + 90 degrees can be accommodated by the controller. THE UNIT
MUST, HOWEVER, BE INSTALLED SO THAT IT IS PARALLEL WITH THE TRAVEL OF THE TOW
VEHICLE AND TRAILER.
CAUTION:
• In the automatic mode, noticeable braking is applied only when
the pendulum sensor detects deceleration.
• With the vehicle at rest and the brake pedal depressed, there
should be only a slight output to the trailer brakes.
Gain Wheel

Acceptable Mounting Angles

Anchor Holes
(4 ea. side)
Mounting
Bracket
Pendulum Leveling Arm Straight Down
Figure 2 - acceptable mounting angles
Red Indicator Light
-35° to 90°
Front of Vehicle
Manual Slide
Lever