Advertisement

Congratulations!
You have chosen the World's best selling pet containment system. Our mission is to
ensure your pet's safety by providing you the tools and techniques to successfully
train your pet. If this is your fi rst pet containment system, there are just a few
important things you need to know:
• Use the system with healthy pets only.
• This system may not be effective for vicious or aggressive pets. If your pet poses a
threat to others, DO NOT USE THE SYSTEM.
• The system is for residential use only.
• You can contain several pets within the Pet Area, but each one must wear a

Receiver Collar.

Correction
Level
Magnet
ProTx
Plus Transmitter
®
The Transmitter is the control center for the fence.
It plugs into a standard outlet. It is not waterproof
and must be installed in a dry location.
Setup and Ongoing Operation
Your PetSafe Professional will perform all the setup steps
for you.
1. Bury the Wire at the Boundary you specify.
2. Install the Transmitter in a dry location.
3. Install the batteries in the Receiver Collar and Remote
Transmitter.
4. Set the Correction Level and test the Receiver Collar.
5. Place the Receiver Collar on your pet.
For the system to operate properly, you must fi rst
• Train your pet to the containment system. (See the
training plan enclosed.) After you've completed training,
you can begin using the Remote Transmitter portion of
the ProTx
-Plus System. (See Training Guide enclosed)
®
• Regularly check and clean your pet's neck. If the
Receiver Collar is too tight or your pet wears it too long, it
can cause Pressure Necrosis, a condition where the skin
deteriorates. If a rash or sore forms, remove the Receiver
Test Station—
Place Receiver Collar
Contact Posts Here
Receiver Collar
Test Light
Power
On/Off Light
Boundary Loop 1 Light
Light on: no Wire
problems
Light off: possible
broken Wire
Contact Posts deliver the Static
Correction—2 sizes, short (for most
pets) and long (for pets with long hair)
Waterproof
Case
ProLite
Receiver Collar
®
When your pet reaches the Warning Zone, the Receiver
Collar gives a warning beep. If your pet continues into the
Static Correction Zone, a safe Static Correction will be
delivered through the Contact Posts to get his attention
until he returns to the Pet Area.
+
Remote Transmitter
Collar for a few days. When replacing the Receiver Collar,
make sure the Contact Posts and the pet's neck are clean.
Consult a veterinarian if needed.
• Every month, check that the Receiver Collar beeps
near the Boundary. If not, check the Troubleshooting
Guide.
• Battery life depends upon how often your pet tests
the Boundary. The SafeLight™ acts as a low battery
indicator, fl ashing every 4 to 5 seconds when replacement
is required.
• Always be careful when using a weed eater or shovel
near the Boundary to prevent damage to the Wire.
Ask your PetSafe Professional
about our Gentle LiteTouch
Training
Magnet Key Dot—
adjusts the
Correction Level
SafeLight™—
LED indicator of
low battery and
Correction Level
Battery Door
Transmitter Indicator Light
Stimulation and Tone Button
Tone Only Button
Programming Button
video and other options.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProLite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Petsafe ProLite

  • Page 1: Receiver Collar

    Setup and Ongoing Operation make sure the Contact Posts and the pet’s neck are clean. Consult a veterinarian if needed. Your PetSafe Professional will perform all the setup steps • Every month, check that the Receiver Collar beeps for you.
  • Page 2: Prepare The Remote Transmitter

    3. If the Transmitter Indicator Light does not come on, you may have inserted a bad or dead battery. Try taking it out and replacing it with one that is known to be good. 4. If the Transmitter Indicator Light still does not come on, contact your PetSafe Professional. Prepare the Receiver Collar To Insert and Remove the Batteries 1.
  • Page 3 PetSafe Professional ® Gentle Step 1: TEACH your pet to avoid the line of Flags using slow, progressive Static Correction. LiteTouch Training ™ for Containment Suggested Correction Level: 2 – 4 Developed by Professional Trainer and Behavior Specialist Rich Weinssen Goal: Your pet begins to avoid the Flags and is comfortable 3-5 feet inside the Flag line.
  • Page 4 3. Continue to provide distractions and temptations to and remove the Receiver Collar immediately. Follow cross the Boundary and continue to reward your pet for the Troubleshooting Guide and/or call your PetSafe good choices. Professional. 4. When your pet has not felt any Static Corrections for 2 After Each Training Session weeks, decrease supervision.
  • Page 5 Correction Zone, training will take longer. Containment Troubleshooting Guide Contact your PetSafe Professional anytime you have a question or concern. Receiver Collar does not • Check and replace the batteries if necessary. The SafeLight™ acts as a low battery beep near the Boundary indicator, fl...
  • Page 6: Training Guide

    The “Come” Command PetSafe Professional Remote ® 1. Put a separate, non-metallic Training Guide collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot leash. General Tips Note: Be sure the extra collar • Eliminate one misbehavior or teach one obedience does not put pressure on the command at a time.
  • Page 7 Trash Raiding Eliminating Unwanted Behavior The easiest way to prevent trash raiding is to remove Jumping Up garbage and tempting food from your pet’s environment. Pets typically jump up to get attention. If you do not want You can use the Remote Trainer to teach your pet to stay your pet to jump on you, then friends or members of the away from these items;...
  • Page 8 Commonly Asked Questions and Answers Once my dog is fully trained Yes; The Receiver Collar does not differentiate which mode the system is in. Either way, the dog will receive a Correction for being too close to the Boundary or for a to the Containment Boundary, bad behavior if you so desire.

This manual is also suitable for:

Protx plus

Table of Contents