Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Inova Manuals
  4. Indoor Furnishing
  5. TableBed
  6. Assembly manual

Inova TableBed Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
| ASSEMBLY MANUAL
TableBed
Inova LLC 2 Van Buren Blvd. Guilderland Center, NY 12085

Advertisement

loading

Related Manuals for Inova TableBed

Summary of Contents for Inova TableBed

  • Page 1 | ASSEMBLY MANUAL TableBed Inova LLC 2 Van Buren Blvd. Guilderland Center, NY 12085...
  • Page 2 QUEEN SIZE Inova LLC 2 Van Buren Blvd. Guilderland Center, NY 12085 TableBed | ASSEMBLY MANUAL The Inova TableBed is fully protected under U.S. Patents #6, 401,276, and #6, 691, 342.
  • Page 3 QUICK START GUIDE TableBed | ASSEMBLY MANUAL...

  • Page 4: Helpful Information

    • Hardware is packed by STEP #, not PART # videos or go directly to YouTube (include link). Tech support is readily available if needed PLEASE NOTE: Your Bed may look different TableBed | ASSEMBLY MANUAL support@inovabed.com Email: than what is shown in the pictures and Phone: 866.528.2804...
  • Page 5 Tech support is readily available if needed PLEASE NOTE: Your Bed may look different TableBed | ASSEMBLY MANUAL support@inovabed.com Email: than what is shown in the pictures and Phone: 866.528.2804...

  • Page 6: Tools Needed

    Flashlight QR Code Scanner App (To view videos) Tech support is readily available if needed PLEASE NOTE: Your Bed may look different TableBed | ASSEMBLY MANUAL support@inovabed.com Email: than what is shown in the pictures and Phone: 866.528.2804 videos throughout this manual...
  • Page 8 STEP 1: Prepare Right Cabinet Side Use this version of Step 1 if your TableBed is an Open Back Model A. Lay the Right Cabinet Side on the floor as shown. B. Screw the H-011 Minifix Pins into the small holes.
  • Page 9 STEP 1: Prepare Right Cabinet Side Use this version of Step 1 if your TableBed is a Closed Back Model A. Lay the Right Cabinet Side on the floor as shown. B. Screw the H-011 Minifix Pins into the small holes.
  • Page 10 STEP 2: Attach Cabinet Front to Cabinet Bottom Use this version of Step 2 if your TableBed is an Open Back Model Cabinet Bottom H-003 H-011 A. Lay the Cabinet Front on the floor and screw the H-011 Minifix Pins into the small holes of the Cabinet Front.
  • Page 11 STEP 2: Attach Cabinet Front to Cabinet Bottom Use this version of Step 2 if your TableBed is a Closed Back Model Cabinet Bottom H-003 H-011 A. Lay the Cabinet Front on the floor and screw the H-011 Minifix Pins into the small holes of the Cabinet Front.
  • Page 12 STEP 3: Attach Valance to Cabinet Top & Attach Shelf to Cabinet Back Use this version of Step 3 if your TableBed is an Open Back Model Cabinet Top Cabinet Top H-065 A. Hold the Valance next to the Cabinet Top.
  • Page 13 STEP 3: Attach Valance to Cabinet Top & Attach Shelf to Closed Back Use this version of Step 3 if your TableBed is a Closed Back Model Cabinet Top Cabinet Top H-065 A. Hold the Valance next to the Cabinet Top.
  • Page 14 STEP 4: Attach Bottom Assembly, Cabinet Top & Cabinet Back to Right Cabinet Side Use this version of Step 4 if your TableBed is an Open Back Model Cabinet Front Cabinet Bottom Cabinet Back Cabinet Top A. Lay the Right Cabinet Side from Step 1 on the floor as shown, using padding to protect it from getting scratched.
  • Page 15 STEP 4: Attach Bottom Assembly, Cabinet Top & Closed Back to Right Cabinet Side Use this version of Step 4 if your TableBed is a Closed Back Model Cabinet Front Cabinet Bottom Closed Back Cabinet Top A. Lay the Right Cabinet Side from Step 1 on the floor as shown, using padding to protect it from getting scratched.
  • Page 16 STEP 5: Prepare Left Cabinet Side Use this version of Step 5 if your TableBed is an Open Back Model H-008 A. Lay the Left Cabinet Side on the floor as shown. B. Screw the H-011 Minifix Pins into the small holes.
  • Page 17 STEP 5: Prepare Left Cabinet Side Use this version of Step 5 if your TableBed is a Closed Back Model H-008 A. Lay the Left Cabinet Side on the floor as shown. B. Screw the H-011 Minifix Pins into the small holes.
  • Page 18 STEP 6: Attach Left Cabinet Side to the Cabinet Assembly Use this version of Step 6 if your TableBed is an Open Back Model Cabinet Bottom Cabinet Back Cabinet Side, Left Cabinet Front Cabinet Top A. Make sure all the Minifix Cams have their arrows pointing to the nearest edge of the panels.
  • Page 19 STEP 6: Attach Left Cabinet Side to the Cabinet Assembly Use this version of Step 6 if your TableBed is a Closed Back Model Cabinet Bottom Closed Back Cabinet Side, Left Cabinet Front Cabinet Top A. Make sure all the Minifix Cams have their arrows pointing to the nearest edge of the panels.
  • Page 20 STEP 7: Lay the Cabinet Over on its Back and then Stand it Up Flipper Flipper A. It is recommended this step is done by two people for safety. Carefully lay the Cabinet over as shown, using padding on the floor to protect the cabinet from being scratched.
  • Page 22 STEP 8: Attach the Footrest to the Table and Leg Use this version of Step 8 if your TableBed has a Table Extension Footrest H-008 Small Flange A. Lay the Table Assembly down, as shown, using padding on the floor to protect the Tabletop from scratches.
  • Page 23 STEP 8: Attach the Footrest to the Table and Leg Use this version of Step 8 if your TableBed does not have a Table Extension Footrest H-008 Small Flange A. Lay the Table Assembly down, as shown, using padding on the floor to protect the Tabletop from scratches.
  • Page 24 STEP 9: Turn the Table Assembly Over Use this version of Step 9 if your TableBed has a Table Extension Footrest Leg Assembly Footrest A. Pivot the Footrest down. B. Carefully turn the Table, Leg, and Footrest assembly over as shown.
  • Page 25 STEP 9: Turn the Table Assembly Over Use this version of Step 9 if your TableBed does not have a Table Extension Footrest Leg Assembly Footrest A. Pivot the Footrest down. B. Carefully turn the Table, Leg, and Footrest assembly over as shown.
  • Page 26 STEP 10: Attach Footrest to Cabinet Front Use this version of Step 10 if your TableBed has a Table Extension Footrest and Table Assembly A. Place the Footrest and Table Assembly towards the cabinet until it touches the Cabinet Front.
  • Page 27 STEP 10: Attach Footrest to Cabinet Front Use this version of Step 10 if your TableBed does not have a Table Extension Footrest and Table Assembly A. Place the Footrest and Table Assembly towards the cabinet until it touches the Cabinet Front.
  • Page 28 STEP 11: Attach Right and Left Bed Panels & Attach Side Rails to Bed Panels Use this version of Step 11 if your TableBed has a plain front Bed Panel H-087 Left Bed Panel H-085 A. Carefully place the finished side of Bed Panels on the carpet or other padded surface.
  • Page 29 STEP 11: Attach Right and Left Bed Panels & Attach Side Rails to Bed Panels Use this version of Step 11 if your TableBed has a recessed Bed Panel Lower Bed Panel Left Bed Panel Lower Bed Panel Left Bed Panel...
  • Page 30 STEP 12: Attach Foot Rail to Bed Panels and Side Rails & Attach Angle Iron Use this version of Step 12 if your TableBed has a plain front Bed Panel H-003 Foot Rail H-011 A. Screw the H-011 minifix pins into the smaller holes at the ends of the Bed Panels, as shown.
  • Page 31 STEP 12: Attach Foot Rail to Bed Panels and Side Rails & Attach Angle Iron Use this version of Step 12 if your TableBed has a recessed Bed Panel H-003 Foot Rail H-011 A. Screw the H-011 minifix pins into the smaller holes at the ends of the Bed Panels, as shown.
  • Page 32 STEP 13: Attach Head Rail to Bed Platform & Place Bed Platform into Cabinet Head Rail Bed Platform A. With two people, one on each side of the Bed Platform Assembly, lift up the assembly and locate it into the Bed Cabinet as shown. Once the Bed Platform has been located, and is supported by the Tabletop and Flipper Assembly proceed to the following step for...
  • Page 33 STEP 14: Attach the Strut Plate to the Bed Platform Bed Panel Head Rail A. From behind the Bed Cabinet, hold the Strut Strut Plate Strut Plate Plate below the Bed Panels and back face of the Head Rail, as shown. Align the Strut Plate threaded inserts with the corresponding holes in the Bed Panel.
  • Page 34 STEP 15: Attach the Table Hinge to the Bed Platform A. Under the Bed Platform, towards the Cabinet, line up the holes in the hinge at the end of the Tabletop with the corresponding holes in the Bed Platform. B. Bolt the H-019 Machine Screws upwards through the holes in the hinge, through the Bed Panels, and into the T-Nuts that are H-019...
  • Page 35 STEP 16: Attach the Bed Platform to the Flipper H-065 A. From underneath the Bed Platform, prop or hold the Flipper up against the bottom of the H-039 Bed Panels, as shown. B. There is a series of holes in the Bed Platform towards the Head Rail.
  • Page 36 STEP 17: Attach the Linking Bars to the Strut Plate H-928 A. Loosen the two Hex Bolts under the Footrest M-36C in the slot near the Table Leg, as shown. Grab one of the bolts with a pair of pliers and slide H-035 the spring mechanism (inside the footrest) Hex Bolt...
  • Page 37 STEP 18: Attach the Handles to the Bed Platform H-425 A. Attach the Handles on each side of the Bed Panels using the H-425 Machine Screws. Handle Tech support is readily available if needed Email: support@inovabed.com Phone: 866.528.2804...
  • Page 38 STEP 19: Put the Mattress in place & Attach the Headboard to the Head Rail Headboard Mattress A. At this point the mattress can be placed into the Bed Platform. B. Locate the Headboard so that the hinge holes align with the holes of the Head Rail. C.
  • Page 40 STEP 20: Raise the Bed and Tighten the Spring Anchor Bolts Use this version of Step 20 if your TableBed has a Table Extension A. Carefully raise the Bed Platform to its upright position. It will feel heavy because the spring mechanism is not engaged yet. The Table will come up as the bed is raised.
  • Page 41 STEP 20: Raise the Bed and Tighten the Spring Anchor Bolts Use this version of Step 20 if your TableBed does not have a Table Extension A. Carefully raise the Bed Platform to its upright position. It will feel heavy because the spring mechanism is not engaged yet.
  • Page 42 STEP 21: Attach the Table Extension to the Upper Leg Use this version of Step 21 if your TableBed has a Table Extension Upper Leg Table Extension H-007 H-041 H-042 H-043 A. Attach the Brackets to the Upper Leg, using Upper Leg the H-041, H-042, H-043 Machine Screws.
  • Page 44 STEP 22: Adjust the Spring Tension to the Lower Leg Use this version of Step 22 if your TableBed has a Table Extension A. The Footrest acts as an outrigger to stabilize the entire TableBed and allow it to be freestanding.
  • Page 45 STEP 22: Adjust the Spring Tension to the Lower Leg Use this version of Step 22 if your TableBed does not have a Table Extension A. The Footrest acts as an outrigger to stabilize the entire TableBed and allow it to be freestanding.

  • Page 47: How It Works

    HOW IT WORKS TableBed | ASSEMBLY MANUAL...
  • Page 48 FootRest. Bed Cabinet (on the Bed Panels) for use to lower the Bed. As the TableBed is lowered down, gravity is TO RAISE THE TABLEBED: naturally starting to pull it down. The At the corner of the bed platform, place springs “kick in”...
  • Page 49 ADJUST TENSION: Place TableBed in Up Position (so there is no tension when you are working) To adjust the tension of the TableBed: Loosen the two 3/8” Bolts under the FootRest Locate the two Bolts underneath the FootRest. To INCREASE tension: slide the bolts toward the The ideal adjustment is to have as much tension as TableLeg (away from TableBed) and tighten.

  • Page 51: Troubleshooting

    TROUBLESHOOTING TableBed | ASSEMBLY MANUAL...
  • Page 52 On the back of the Sides. At this point, the Bed can be lowered MY TABLEBED IS MAKING Headboard there are guide pins located on down completely. To re-engage the pins,...
  • Page 53 TROUBLESHOOTING (CONT.) (See: How It Works - Adjustment). Test. If the TableBed does not move freely or this TIP: Bag and label hardware per Step. does not resolve the issue, Contact Us to This will be very helpful when reassembling The TableBed has 5 sets of Hinges that further troubleshoot.
  • Page 54 TROUBLESHOOTING (CONT.) THE TABLEBED IS DIFFICULT TO (see assembly manual for proper installation). If the TableBed still will not raise up, lower BRING DOWN (OPEN) Test. Prior to moving Bed back in place, the Headboard (see instructions under Access Behind Bed) and with a flashlight,...
  • Page 55 866.528.2804. questions and received important feedback on our or call us at products and services. We hope you enjoy your Inova TableBed for many With great care, and through continuous years to come! improvement and learning, we have incorporated THANK YOU.