Dell P2419HC User Manual page 19

P2719HC
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
ON
E
TEC
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, one of the following message is displayed:
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance.
***Test data is measured based on no USB-C cable attached condition.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise.
No warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE: These monitors are ENERGY STAR certified.
NOTE:
P : Power consumption of on mode as defined in Energy Star 7.0 version.
ON
E : Total energy consumption in kWh as defined in Energy Star 7.0 version.
TEC
Vertical Video
Sync
Active Active
Inactive Off
- -
Power Indicator
White
White
(Glowing)
Off
Power Consumption
16.82 W
52.99 kWh
About Your Monitor
Power Consumption
125 W (maximum)**
26 W (typical)
Less than 0.3 W***
Less than 0.3 W
| 19