Casio 240CR Most Important Functions

Basic functions

Hide thumbs Also See for 240CR:

Download this manual

Ensure register is turned to REG mode

1. Making a Sale

1. A. Press the key that corresponds to the item purchased, OR

B. Use the keys to enter in the amount (no decimal point!) and

then press the relevant department key.

Note – method 1A will only work where a price has been

programmed in for that item. If the machine beeps, that means no

price has been programmed and you need to use method 1B.

2. Repeat step 1 as often as necessary to enter additional items.

3. Press SUBTOTAL for the total amount due

4. Enter amount of cash given by customer.

5. Press the CASH key. If the customer is paying by cheque or eftpos

then instead of pressing CASH press CHEQ or EFTPOS

6. The amount of change to be given to the customer will display on

the screen.

Note - you do not need to perform step 4, however if you do not, then

the machine will not display the change due in step 6.

2. Multiple Tender

1. When your customer pays by more then one method (eg part cash,

part eftpos), first enter the amount to be paid by the first method

2. Press the key corresponding to the method of payment (eg CASH)

3. Enter the amount to be paid by the second method

4. Press the key corresponding to the second method of payment (eg

EFTPOS)

CASIO 200CR & 240CR

BASIC FUNCTIONS

Page 1 CASIO 200CR & 240CR BASIC FUNCTIONS Ensure register is turned to REG mode 1. Making a Sale 1. A. Press the key that corresponds to the item purchased, OR B. Use the keys to enter in the amount (no decimal point!) and then press the relevant department key.
Page 2 3. Making Multiple Sales Of Same Product 1. Enter the number of items you are selling (eg 4) 2. Press the X/DATE TIME key 3. Enter the item being sold using step 1A or 1B from above. 4. Press SUBTOTAL to give the total amount due 5.
Page 3 7. To Give A % Discount (eg 15%) 1. Press the key that corresponds to the item purchased, or use the keys to enter in the amount and then the PLU 2. Enter the amount to be discounted (eg 15 for 15%) 3.
Page 4: Manager Functions
MANAGER FUNCTIONS A. Price Changes TURN Turn key to the PROGRAM position DISPLAY Should show P ENTER New price (without using decimal point) PRESS Preset item button that you wish to change REPEAT Steps 3 to 4 until finished PRESS Subtotal button to finish TURN Key back to REG...
Page 5 PRESS X / Time Date button TURN Key back to REG C. Reports X Report – Read only, no reset (use for shift total) TURN Turn key to the X position PRESS CASH button TURN Key back to REG Z Report - Daily Read & Reset (end of day report) TURN Turn key to the Z position PRESS...

200cr