Operating Your Sicare Pilot Using Power / While Charging - Tash SICARE Pilot User Manual

5
evo soft
@
6. Operating your SICARE Pilot using power while charging the
rechargeable batteries:
1. Place the SICARE Pilot in the charger
2. Plug the telephone connector of the power cable into the holder, and plug the power cable
into the wall socket.
Now your SICARE Pilot is being supplied with power from the mains, independent of which
batteries are being used.
Please be aware of the following:
Battery
holder contains
Rechargeable
batteries
Regular
Batteries
SICARE Pilot - User Manual
Battery switch
is set to
Position A
Position B
Position A
Position B
Rechargeable batteries are automatically
charged. During charging, the half-empty
battery symbol is shown
Charging stops automatically once the re-
chargeables are fully charged.
! Operation is not permitted: Danger of
damaging the device!!
! Operation is not permitted: Danger of
damaging the device!!
The batteries can be left in the holder even
though external power is being used.
Version 4.1
International Inc
Action
User Manual / Page 7
.