Tash SICARE Pilot User Manual page 19

5
evo soft
@
Retraining Single Commands - cont.
Using the special functions and training menus
Display
What to press or do
Display
What to press or do
Display
What to press or do
Display
What to press or do
Display
Single Switch Mode
The single switch mode or scanning mode can be switched on or off. Furthermore the
parameters time period for scanning each menu point (Scan Time) and the number of scans
made in each active level (Scan repeat) can be edited.
Low Battery
The acoustical warning for low batteries can be switched on or off.
SICARE Pilot - User Manual
SF/Training
t repeat
next
SF/training
t delete word
next
SF/training
t delete all
next
SF/training
t restart
next
Please wait...
comments
t
If you want to erase the voice pattern for
'next', press the OK key
If you want to delete the voice patterns for all
t
words, press the OK key
The training menu can only be exited by
t
doing a restart. The saved data will be
accepted, and the new voice patterns will be
used from now on. By turning off the device,
training can be aborted (quit without saving).
Save and restart take about 30 seconds.
Version 4.1
.
International Inc
User Manual / Page 19