Tash SICARE Pilot User Manual page 16

5
evo soft
@
.
International Inc
SICARE Pilot - User Manual
13. Retraining Single Commands
Commands are trained during the configuration of the SICARE Pilot together
with the PC. However, the pilot itself offers the possibility to retrain single
commands. This might be necessary if you discover that the commands you
speak to the device are not being correctly recognized by it.
To train single commands, please do the following:
1. Select the commands with "select word"
2. Speak and record your voice pattern with "record"
3. Save the recording in the SICARE Pilot memory with "store"
4. Restart the device with "start again", thus transferring the voice pattern
from the temporary memory into the long-term memory.
Restarting the device is not necessary after recording each single voice
pattern. It is enough to do so after a complete training session: choose
commands, record voice patterns, and store - then restart after ending the full
session. Remember that turning off the device in the middle of the training
aborts the session and nothing is saved. Details can be found in the table that
follows.
User Manual / Page 16
Version 4.1