Diagnose - Nexas NexLink NL102PLUS User Manual

3) Unit system setting: Set the measurement unit system.

5. Diagnose

In Figure 4-1, press [
vehicles, a screen similar to figure 5-1 will appear:
If a vehicle equipped with OBDII is tested, the system will enter the function
selection screen once scanning has finished successfully.
OK
Press [ ] to enter the system selection screen. For detailed operations,
please refer to Chapter 5.2 "OBDII Diagnosing".
If a heavy-duty truck is diagnosed, the system will continue scanning the
protocols the truck supports and then enter the system selection screen. See
OK
] to scan the protocols of heavy-duty trucks and OBDII
Figure 5-1
Figure 5-2
NexLink NL102PLUS User Manual
11