Connections & General Operations; Connections - Nexas NexLink NL102PLUS User Manual

4. Connections & General Operations

4.1 Connections

1. Turn the ignition off.
2. Locate the heavy duty vehicle's DLC.
3. Select the desired diagnostic adaptor according to your vehicle's DLC.
4. Plug one end of 6pin or 9pin DLC diagnostic adaptor into the included OBD II
16 pin connector, and connect the other end to the heavy duty truck's DLC.
5. Turn the ignition on. Engine can be off or running.
6. After finishing, the system will enter the main menu interface, as shown in
Figure 4-1.
Function Items
OBDII/EOBD
HD OBD
HD DPF
HD Service
DTC Library
Setup
Figure 4-1
Diagnose your car.
Diagnose your heavy-duty truck.
Perform the DPF Reset or Regeneration
Perform the sensor calibration, like O2 senor , etc.
The description of trouble code
To configure the system date and time and turn on /
off the beeper.
NexLink NL102PLUS User Manual
Descriptions
9