Safety - Samsung MW730BB Owner's Manual

Safety

P
RECAUTIONS TO
P
OSSIBLE
E
XCESSIVE
E :
NERGY
(a) Do not attempt to operate this oven with the door
open since open-door operation can result in
harmful exposure to microwave energy. It is
important not to defeat or tamper with the safety
interlocks.
(b) Do not place any object between the oven front
face and the door or allow soil or cleaner residue to
accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is
particularly important that the oven door close
properly and that there is no damage to the
1) Door (bent or dented),
2) Hinges and latches (broken or loosened),
3) Door seals and sealing surfaces.
(d) The oven should not be adjusted or repaired by
anyone except properly qualified service
personnel.
WARNING
Always observe Safety Precautions when using your
oven. Never try to repair the oven on your own – there
is dangerous voltage inside. If the oven needs to be
repaired, call 1-800-SASUNG for the name of an
authorized service center near you.
A
VOID
E
XPOSURE TO
M
ICROWAVE
S T
AVE HESE
I S
MPORTANT AFETY
When using any electrical appliance, basic safety precautions
should be followed, including the following:
WARNING
To reduce risk of burns, electric shock, fire, personal
injury or exposure to excessive microwave energy:
• Read all safety instructions before using the appliance.
• Read and follow the specific "Precautions to Avoid Possible Exposure
to Excessive Microwave Energy" on this page.
• This appliance must be grounded. Connect only to properly grounded
outlets. See "Important Grounding Instructions" on page 4 of this
manual.
• Install or place this appliance only in accordance with the installation
instructions provided.
• Some items, like whole eggs and food in sealed containers, may
explode if heated in this oven.
• Use this appliance only for its intended use as described in the
manual. Do not use corrosive chemicals or vapors in this appliance.
This type of oven is specifically designed to heat, cook, or dry food. It
is not designed for industrial or laboratory use.
I
NSTRUCTIONS
2
I
NSTRUCTIONS