CAMDEN CM-300 Installation Instructions

D o o r Ac t iv ati o n D e v i c e s
CM-300 Series
Exit Switch
INSTALLATION INSTRUCTIONS
1. GENERAL DESCRIPTION
Camden CM-300 series illuminated Exit
switches are available with stainless-steel
single-gang faceplate (CM-300), or with
Narrow jamb size faceplate (CM-310).
The 1/2" x 3/4" illuminated translucent button
is easy to push, and supplied in momentary or
2. SPECIFICATIONS
Models CM-300
2.75" W x 4.5" H x 1 5/16"
Dimensions
(70mm x 114mm x 33mm)
Contacts
Mom. / Maint.
Switch
10 amps @ 125 VAC
Rating
Electrical
100,000 @ rated capacity
Life
Mounting
2 x #6-32 machine screws
Lens
Red, Green, or Blue
Colour
Legend
'EXIT'
LED
12 or 24 V DC
Voltage
2. INSTALLATION
Mounting
1. The colour coded leads are permanently soldered onto the
back of the switch. The Red & Black wires are for the light.
2. For normally open circuits use the Blue & Green wires.
For normally closed circuits use the Yellow & Green wires.
3. Tuck wiring into box and fasten switch plate using screws
provided (CM-300), or tuck wiring into frame and fasten to
frame using screws provided (CM-310).
maintained models. Red buttons are standard
but blue and green are also available.
The supplied LED will work on 12 volts, or
24 volts (using supplied inline resistor).
3. WARRANTY
Camden Door Controls guarantees the CM-300 series to be
free from manufacturing defects for 3 years from date of sale.
CM-310
If during the first 3 years a CM-300 series switch fails to perform
correctly, it may be returned to our factory where it will be
1.75" W x 4.5" H x 1 5/16"
repaired or replaced (at our discretion) without charge. There
(44mm x 114mm x 33mm)
is no warranty for bulb damage due to over voltage! Except as
stated herein, Camden extends no warranties expressed or
implied regarding function, performance or service.
CM-300RE CM-310E
Page 1 of 1