Operation; Turning On The Power And Selecting A; Display Language; Setting The Clock - Samsung ME4096W Owner's Manual

O
PERATION

Turning on the Power and Selecting a

Display Language

The first time you plug the power cord into an out-
let, or after there has been an interruption in
power, the display shows "SAMSUNG SO SIM-
PLE." At this point, you can select a language and
weight system for the display. You can choose
between English, French or Spanish and pounds
(LBS) or kilograms (KG). To do so,
1
Press Start immediately after
plugging in your microwave. The display
shows " ENGLISH/LBS". If the display
does not show "ENGLISH/LBS", you will
need to unplug the microwave and then
plug it in again in order to change the
language.
2
Press START repeatedly to select the lan-
guage and weight system you wish to use:
• ENGLISH/LBS,
• ENGLISH/KG,
• FRENCH/KG,
• SPANISH/LBS,
• SPANISH/KG
• PORTUGUESE/KG
If you continue to press START, the set-
tings will cycle in the order shown here.
MICRO
When you have selected the language and weight sys-
tem you want to use, press the Pause/Cancel button to
end this procedure, or press Clock to set the clock.
8 O
PERATION

Setting the Clock

1
Press the Clock button. The display will
show:
MICRO HELP
2
Use the number buttons to enter the cur-
rent time. You must press at least three
numbers to set the clock. If the current
time is 5:00 enter, 5,0,0.
HELP
3
Press Clock again. A colon will appear,
indicating that the time is set.
If there is a power interruption, you will need to
reset the clock.
You can check the current time while cooking is in
progress by pressing the Clock button.

Using the Pause/Cancel Button

The Pause/Cancel button allows you to clear
instructions you have entered. It also allows you to
pause the oven's cooking cycle, so that you can
check the food.
• Pause the oven during cooking: press
Pause/Cancel once. To restart, press Start.
• Stop cooking, erase instructions, and return the
oven display to the time of day: press
Pause/Cancel twice.
• Correct a mistake you have just entered: press
Pause/Cancel once, then re-enter the instructions.