Advertisement
Advertisement
Prohibited use- - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Makita LD050P...
Add / Volume / Important paragraphs which must be adhered to in practice Subtract Pythagoras/ as they enable the product to be used in a technically Memory correct and efficient manner. Measuring Clear / Off reference / Unit Makita LD050P...
Insert batteries To ensure a reli- able use, do not use zinc-carbon Battery Pythagoras batteries. Change batter- ies when battery Area / symbol is flash- Memory Volume ing. Measuring reference Info Min/Max Measuring Addition / Units Subtraction Main line Makita LD050P...
Distance is measured from the Distance is measured from the rear front of the device. of the device (standard setting). Distance unit setting Switch between the following units: 2 sec 0.000m 0‘00‘‘ 1/16 0.00m 0.00in 0.00ft 0 1/16in Makita LD050P...
The same process can be The next meas- The next meas- used for adding or subtracting urement is added urement is sub- areas or volumes. 5.515 to the previous tracted from the 7.332 12.847 one. previous one. Makita LD050P...
Volume Aim laser at first Aim laser at sec- Aim laser at third target point. ond target point. target point. The result is shown in the main line and the measured value above. 78.694 Makita LD050P...
Aim laser at lower point. per point. tangular point. The result is shown in the main line and the measured distance above. Pressing the measuring key for 2 sec in the function activates auto- matically Minimum or Maximum measurement. 8.294 Makita LD050P...
Measuring Functions Memory (5 last results) 5 last results are Navigates trough displayed. 5 last results. 8.294 8.294 Makita LD050P...
116 x 45 x 29 mm 4.57 x 1.77 x 1.14 in Weight (with batteries) 0.10 kg / 3.527 oz Temperature range: - Storage -25 to 70 °C -13 to 158 °F - Operation 0 to 40 °C 32 to 104 °F Makita LD050P...
Cause Correction Makita Corporation Anjo, Calculation error Perform measurement Aichi 446-8502 Japan / again. Makita, Jan-Baptist Vinkstraat 2, 3070, Temperature too Let device cool down. Belgium high Internet: www.makita.com Temperature too Warm device up. The company above is responsible for...
The device conforms to the most stringent • Aiming directly in the sun sion hazardous areas or in aggressive requirements of the relevant standards environments. and regulations. Yet, the possibility of causing interference in other devices cannot be totally excluded. Makita LD050P...
It is a Class 2 laser product in accordance the instructions, may cause harmful inter- LD050P with: Makita xxxxxxx xxxxxxx xxxxxxx ference to radio communications. • IEC60825-1 : 2014 „Radiation safety of However, there is no guarantee that inter- Made in Hungary Batteries: 2 x AAA laser products“...
Comments to this Manuals
Latest comments: