Sony HDR-CX440 How To Use Manual page 88

This function works via a Wi-Fi network; therefore there is a slight time
difference between the moment this product starts/stops movie recording and
the moment the connected devices start/stop movie recording.
The upper limit of the recording time for this function is as follows.
When [ File Format] is set to [
[30p]︓6 h 31 m
When [ File Format] is set to [
[60p]︓3 h 15 m
Hint
The status of the connected camera is displayed on the LCD monitor of this
product in real-time.
You can operate zoom of the camera selected with
displayed in (B) using the zoom lever of this product.
[69] How to Use
Connecting this product to one camera with Multi
Camera Control (Single Connection) (HDR-
CX440/PJ410/PJ440)
You can connect this product with another camera via Wi-Fi. By connecting via Wi-
Fi, you can control another camera with this product.
1. Turn on the power of the camera you want to connect and set it in a state
ready for Wi-Fi connection.
For details on the operation, refer to the instructions manual of the
camera.
2. Turn on this product, then select
Camera Ctrl Set] - [Single Connection].
3. Select
A list of SSIDs that can be connected is displayed.
4. Select the SSID of the camera you want to connect.
The registration is complete.
Using the Wi-Fi function
- [Wireless] - [ Function] - [Multi Camera Control].
XAVC S HD], [
XAVC S HD], [
Controlling other cameras through this product
- [Wireless] - [
Frame Rate] is set to
Frame Rate] is set to
, or icons
Setting] - [Multi