Charging The Battery Pack Using The Ac - Sony HDR-CX440 How To Use Manual

To remove the battery pack
Turn off this product, then open the battery cover (
battery pack from this product sliding the battery release lever (
Note
You cannot insert any battery pack other than the X type to this product.
In the default setting, the power turns off automatically if you leave this product
without any operation for about 2 minutes, to save battery power (Power Save).
[10] How to Use
Charging the battery pack using the AC Adaptor
Charge the battery pack using the supplied AC Adaptor. Insert the battery pack in
advance.
1. Close the LCD monitor.
2. Pull out the Built-in USB Cable from this product.
3. Connect this product to a wall outlet (wall socket) using the USB connection
support cable and the AC Adaptor.
Getting started Power source preparations
), and then remove the
).