Charging The Battery Pack Using Your - Sony HDR-CX440 How To Use Manual

[11] How to Use Getting started
Charging the battery pack using your computer
Charge the battery pack by connecting this product and your computer with the
Built-in USB Cable. Insert the battery pack in advance.
1. Close the LCD monitor.
2. Pull out the Built-in USB Cable from this product.
3. Connect this product to a running computer using the Built-in USB Cable.
The POWER/CHG (charge) lamp turns orange.
The POWER/CHG (charge) lamp turns off when the battery pack is fully
charged. Disconnect the Built-in USB Cable from the computer, and then
store it in the pocket on the grip belt.
If the Built-in USB Cable is not long enough for the connection, use the
USB connection support cable.
: Built-in USB Cable
: To a wall outlet (wall socket)
Power source preparations