Radio Wave Radiation; The Influence On The Environment Of Radio Wave Radiation; The Influence On The Human Body Of Radio Wave Radiation; Note About Interference - Epson OT-WL02 Technical Reference Manual

Hide thumbs Also See for OT-WL02:
Table of Contents

Advertisement

Radio wave radiation

The influence on the environment of radio wave radiation

❏ The Radio Frequency module that can be installed in this product radiates the same high frequency
energy as some other high frequency devices but the level of the energy radiated from it is suppressed
so that it is much lower than the electromagnetic energy radiated from radio equipment like cell
phones.
❏ Under some situations and in certain environments, the use of this product is sometimes limited by the
owner of the building or a representative with responsibility for the group. For example, it may be
restricted in the following case:
• Use in an environment where it may cause interference with other devices and services.
❏ If you do not understand the radio device usage policy in a specific group or environment, such as an
airport, ask permission before using this product.

The influence on the human body of radio wave radiation

The output power radiated from the Radio Frequency module that can be installed in this product is much
lower than the radiation limit specified in the safety standard. However, it is best to avoid allowing this
product to contact your body during usual operation. While using, be especially careful not to touch the
wireless LAN unit.

Note about interference

❏ The Radio Frequency module that can be installed in this product generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
❏ If this product does cause harmful interference to radio or television reception, which can be
determined by turning this product off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between this product and receiver.
• Connect this product into an outlet on a circuit different from that to which the receiver is
connected.
• Consult your dealer or an experienced radio/TV technician for help.
❏ Never disassemble or modify this product or the installed Radio Frequency module.
❏ Seiko Epson Corporation shall not be liable for interference to radio/TV resulting from changes or
modifications to this product or the installed Radio Frequency module not expressly approved by
Seiko Epson Corporation.
3

Advertisement

Table of Contents
loading

Table of Contents