Table of Contents
Advertisement
Follow the steps below to connect the printer.
1
Turn on the printer.
2
Activate Windows Wireless Network Connection and select [EPSON_Printer] as the
connection device on the screen that appears.
If the window to enter a pass phrase appears, enter "12345678".
Default settings on printer are the following values.
Network mode
SSID
Pass phrase
IP Address
An example of Connection Screen
• For the setting method for the computer for setting, see the manual for your
computer.
• If you are setting multiple TM printers, only turn on the power for the printer you are
setting. You cannot set multiple printers at the same time.
When connecting to the printer is complete, setup the Wireless LAN by using the EpsonNet Config.
For downloading and installation of the EpsonNet Config, see
3
Start up the EpsonNet Config of the setting computer.
SimpleAP mode
EPSON_Printer
12345678
192.168.192.168
Chapter 2 Installation
"Software" on page 23
2
19
Advertisement
Table of Contents
