Epson OT-WL02 Technical Reference Manual page 22

Connection from the Setting Computer
Connect the setting computer to the access point by the wired LAN. The setting of the access point is set for
the Status Sheet. The setting items are as follows.
As for the setting method of the setting computer, refer to the manual of the
computer used.
• SSID (Ex: EpsonNet)
• IP Address (Ex: 192.168.192.2)
(Don't set the same address as the IP Address of the printer to the setting computer and the access point.
Example: If the IP Address is 192.168.192.168, the IP Address of the setting computer should be set to
another number, such as 192.168.192.2. The same address (192.168.192.168) cannot be used.)
• Channel (Ex: 11 ch)
• Security setting (Ex: WPA2-PSK)
• Passphrase (Ex: EpsonNet)
When you set up more than one TM printers equipped with wireless LAN interface,
turn on only one printer. If more than one printer is turned on at the same time, the
TM printer cannot be set up.
At this stage, the TM printer can communicate with the setting computer.
Setting the Printer
To set the printer or the interface which is installed in the printer, follow the steps from 3 to 5 in
from a Windows Computer" on page 18-page
22
20.
"Setting up