Cisco ASR 9901 Manual page 31

Preparing for Installation
Figure 47: Cisco ASR 9901 DC Power Cable Terminal Block
Figure 48: Cisco ASR 9001 DC Power Cable Terminal Block
The figure below shows DC power source cable connections for single DC power module.
Caution To avoid shock hazard, be sure to apply shrink wrap tubing around the wire entry area of the terminal block.
Warning Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals
are not in service. Be sure uninsulated conductors are not accessible when cover is in place. Statement
1086
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
DC Powered Router
Preparing for Installation
31