Advertisement
1
Disconnect the shaver from the mains, remove
it from the Jet Clean System or remove it from
the charging stand.
2
Let the shaver operate until it stops.
3
Undo the screws in the back of the shaver and
in the hair chamber.
4
Remove the front panel and the back panel.
5
Bend the 6 hooks aside and take out the
power unit.
Be careful, the hooks are sharp.
6
Remove the battery.
Be careful, the battery strips are sharp.
Do not put the shaver back into the plugged-in Jet
Clean System or charging stand after you have
removed the rechargeable battery.
Do not connect the shaver to the mains again after
you have removed the rechargeable battery.
guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.
English
25
Advertisement
