Kenco Mechanical Grapple Operating Manual page 6

2. ALL RIGGING COMPONENTS MUST HAVE A WORKING LOAD
LIMIT THAT IS EQUAL TO OR GREATER THAN THE COMBINED
WEIGHT OF INTENDED LOAD PLUS THE MECHANICAL
GRAPPLE.
3. UNDER NO CIRCUMSTANCES SHOULD ANY COMPONENT USED
AS RIGGING TO THE MECHANICAL GRAPPLE BE OF A RATED
CAPACITY LESS THAN THAT OF THE MECHANICAL GRAPPLE.
4. DO NOT RIG UNPROTECTED NYLON SLINGS OR WIRE ROPE
DIRECTLY THROUGH LIFT BAIL.
5. IF USING EQUIPMENT OTHER THAN A CRANE: USE RIGGING OF
SUFFICIENT LENGTH TO PREVENT CONTACT BETWEEN THE
MECHANICAL GRAPPLE AND EQUIPMENT.
KENCO Mechanical Grapple Operation Manual
170 State Route 271
Ligonier, PA 15658
1-800-653-6069
6