Section V. Operation......................7 Section VI. Maintenance ......................9 Section VII. Inspection Criteria ..................10 Section VIII. Parts/Drawings ....................11 Section IX. Warranty ......................12 RECORD INFORMATION HERE FOR REFERENCE MODEL BODY SERIAL NUMBER Notes: KENCO Mechanical Grapple Operation Manual...
1-800-653-6069 Section I. General Information. 1. May we take this opportunity to thank you for purchasing the KENCO Mechanical Grapple. The Mechanical Grapple provides the ultimate in below the hook handling versatility. The Mechanical Grapple and is quality engineered to provide years of trouble free, low maintenance performance.
Page 4
2. Do not wear loose clothing, jewelry or hairstyles that could become entangled in the KENCO Mechanical Grapple or rigging hardware. 3. Keep hands, feet, and any other appendages clear of Mechanical Grapple while in operation. C. Operation Safety.
INNER TUBE ASSEMBLY Section IV. Setup. Preliminary inspection 1. Check Mechanical Grapple for any signs of damage incurred during shipping. 2. Check for missing items/fasteners. 3. Check all bolts for snugness. 4. Record model, and serial # of assembly and components.
Page 6
WEIGHT OF INTENDED LOAD PLUS THE MECHANICAL GRAPPLE. UNDER NO CIRCUMSTANCES SHOULD ANY COMPONENT USED AS RIGGING TO THE MECHANICAL GRAPPLE BE OF A RATED CAPACITY LESS THAN THAT OF THE MECHANICAL GRAPPLE. DO NOT RIG UNPROTECTED NYLON SLINGS OR WIRE ROPE DIRECTLY THROUGH LIFT BAIL.
3. Position Mechanical Grapple at or near center of object to be lifted. 4. Lower Mechanical Grapple onto object, taking care to minimize impact. 5. Ensure that all persons are clear of the Mechanical Grapple and the load. 6. Release tension on lift cable.
Page 8
1-800-653-6069 G. DO NOT ALLOW LOAD TO CONTACT ANY SURFACE/OBJECT WHILE BEING HANDLED. The Mechanical Grapple produces grip proportional DANGER to and dependent on the weight of the load. It is for this reason that while in operation the Mechanical Grapple and wall NEVER be allowed to contact other items.
2. Inspect holes, pins, bolts etc for wear. See sect VIII for criteria. 3. Remove actuator, clean and lubricate with light penetrating oil – check for signs of wear, replace if necessary. * Frequency depends on usage, environmental conditions, etc. KENCO Mechanical Grapple Operation Manual...
Ligonier, PA 15658 1-800-653-6069 Section VII. Inspection Criteria THE MECHANICAL GRAPPLE UNIT AND ALL OF ITS ASSOCIATED COMPONENTS SHALL BE REMOVED FROM SERVICE AND TAGGED APPROPRIATELY UNTIL RECERTIFICATION BY A QUALIFIED INDIVIDUAL IN ANY OF THE FOLLOWING CONDITIONS: A. General 1.
1-1/4" X 3" GR. 8 CAPSCREW 1-1/4" X 4" GR. 8 CAPSCREW 1-1/4" X 6" GR. 8 CAPSCREW 1-1/4" X 7" GR. 8 CAPSCREW 1-1/2" X 12" GR. 8 CAPSCREW 1-1/4" FLAT WASHER 1-1/4" NYLOCK NUT 1-1/2" NYLOCK NUT KENCO Mechanical Grapple Operation Manual...
1. KENCO Corporation (KENCO) warrants the KENCO (not including pads or consumable items) sold by KENCO to be free from proven defects in material and workmanship for a period of six (6) months from the delivery date to the original customer 2.