To Power It On; To Connected It With Your Pc,Pi, Tv Box; To Charge The Keyboard - iPazzPort KP-810-21S User Manual

2) To connect the keyboard with your PC, Pi, smart TV
(1) Plug the USB receive into the PC USB port
(2) turn on your keyboard and wait for a seconds
(3) after a while slide on your touchpad to check if the cursor
answers your finger action
Attention:
(1) Please make sure the keyboard is not in low power status
(2) The keyboard is very easy to use with plug and play function
(3) no driver programmer needed
(4) no operation on the keyboard when the PC recognizes your USB receiver
(5) please refer to the troubleshooting if there is no reaction on the keyboard
or poor signal connection

3) To charge the keyboard

The low power indicator (the first indicator) will blinks to imply low power
capacity. Please charge the keyboard with including charging cable with
three ends. You can plug the USB end to the PC USB port and the micro USB
end to the keyboard port.( another end ,as a bonus, is an external USB port
to plug in your receiver for better signal connection)
Attention:
(1) please charge the keyboard with including charging cable
(2) please charge the keyboard timely to prolong the battery expectancy
(3) you can operate the keyboard in charging status only to prolong the
charging period.
(4) the charging indicator(red)will be steady on and goes out if fully charged
5