Lorell LLR60536 Assembly Instructions

LLR60535,60536,60537,60538 Assembly Instructions
Carefully unpack all parts and identify them with parts list before attempting
to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes on 5 STAR BASE (B).
2. Insert GAS LIFT (C) into the center hole top of 5 STAR BASE (B).
3. Insert BELLOW (D) over GAS LIFT (C).
4. Attach both the left and the right ARMRESTS (F) to SEAT CUSHION
(E) by using 2 KNOBS (H) and 2 WASHERS (G).
5. Insert BACK CUSHION (I) with the BACK SUPPORT into the SEAT
PLATE. Attach the KNOB (J) to the SEAT PLATE of the SEAT
CUSHION (E). Adjust BACK CUSHION to desired height and tighten
KNOB (J).
6. Insert the pre-assembled seat unit onto the gas lift to finish the
assembly.
7. Be sure that all the screws are fully tightened before using.
Description
A. CASTERS
B. 5 STAR BASE
C. GAS LIFT
D. BELLOW
E. SEAT CUSHION
F. ARMRESTS (L&R)
G. WASHERS
H. KNOBS
I. BACK CUSHION
J. KNOB
Parts List
Quantity
5
1
1
1
1
2
2
2
1
1