Back Panel Connections - PRESONUS Studio 2 Owner's Manual

2 Hookup
2.2

Back Panel Connections

2.2 Back Panel Connections
Input Gain Control. These knobs provide 50 dB of variable gain (0 to +50 dB for
microphones, -15 to 35 dB for line/instrument).
Mixer. The Mixer knob allows you to blend your input signals with the playback
streams from your computer so that you can monitor your input signals without any
latency (delay). If the knob is positioned at 12 o'clock, the input signal and the
playback stream will be equally balanced. Turning the knob to the left will increase
the level of the input signal relative to the playback stream; turning to the right will
increase the level of the playback stream relative to the input signal as illustrated
below:
Inputs Playback
Mixer
Inputs Playback
Inputs Playback Playback Inputs
Headphone Level. This knob controls the level of the rear panel headphone output.
Main. The main knob controls the output level for the main left/right outputs on the
back of your Studio 2|4 and has a range of -80 dB to 0 dB. This control provides
attenuation only.
Headphone Output. The rear-panel headphone output mirrors the same streams as
the Main left/right outputs.
Main Outs. These are the Main outputs for the Studio 2|4. The output
level of the Main outputs is controlled by the Main level control on the
front of the unit. Playback streams 1 and 2 are routed to these outputs.
Studio 2|4
Owner's Manual
4