PRESONUS Studio 2 Owner's Manual page 12

3 Connecting to a Computer
3.3 Using the Studio 2|4 with Popular Audio Applications
Apple Logic Pro/Express 7+:
Avid Pro Tools 9+
Cakewalk Sonar 6+
1. Launch Logic Pro/Express.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select your Studio 2|4 from the device menu.
6. You will be asked if you'd like to relaunch Logic. Click "try (re)launch. "
7. Your Studio 2|4 features custom I/O labels for faster work flow. To enable
these labels for use in Logic, go to Options | Audio | I/O Labels.
8. The second column in the pop-up window will be named
"Provided by Driver. " Activate each of these labels for your
Studio 2|4. When you are done, close this window.
9. You are now ready to use your Studio 2|4.
1. Launch Pro Tools.
2. Got to Setup | Hardware and select your Studio 2|4
from the Peripherals list. Click OK.
3. Go to Setup | Playback Engine and select your Studio 2|4
from the menu at the top of the window. Click OK.
1. Launch Sonar.
2. Go to Options | Audio... and click on the Advanced tab.
3. Change the Driver Mode to "ASIO. "
4. Click the "OK" button.
5. Restart Sonar.
6. Go to Options | Audio... and click on the Drivers tab.
7. Highlight all input and output drivers beginning
with your Studio-series product name.
8. Go to Options | Audio... and click on the General tab.
9. Set the Playback Timing Master to "Studio 2|4 ... DAW Out 1. "
10. Set the Recording Timing Master to "Studio 2|4 ... DAW Out 2. "
Studio 2|4
Owner's Manual
10