Table of Contents
Advertisement
Messages, warnings and failure codes
WARNING :
go to
stand by
WARNING :
invalid
frequency
input
WARNING :
default
settings
loaded in
the E2PROM
table is
deleted
FAILURE
invalid
RWI soft
version
FAILURE
I
2
C error
addr. : 7FH3
FAILURE
short
circuit on
2
I
C bus
8-2
Projector will switch to 'stand-by'
when the RCVDS is no longer
available.
The entered frequency or ap-
plied frequency of the source is
out of the projector's range.
Adjustment settings are lost. Re-
load using Projector Control Soft-
ware via PC or MAC (if this op-
tion is available), or readjust im-
age.
Message to inform that selected
table is deleted. This message
will be followed by 'confirm mes-
sage', on which the user has to
answer.
Wrong software version in your
projector. Call for technical sup-
port.
Hardware failure. Call a quali-
fied service technician for repair.
Hardware failure. Call a quali-
fied service technician for repair.
FAILURE
Serial communication error be-
RCVDS com-
tween RCVDS800 and projec-
munication
tor.
error
FAILURE
Hardware failure. Call a quali-
RWI commu-
fied service technician.
nication
error
FAILURE
Communication error between
IRIS commu-
IRIS 800 and the projector. Call
nication
a qualified service technician.
error
WAIT
Message during the start up of
starting
the IRIS 800. Message will dis-
up
appear when the IRIS 800 is
ready to accept commands.
IRIS
5975847 BARCOGRAPHICS 1208S 220197
Advertisement
Table of Contents
