Accessories - Kyocera S2410 User Manual

Enable voice answer
Menu Settings Voice Features
Select > >
Voice Answer With Accessory
> . To use the voice
answer feature, you must disable the Auto-Answer
feature (see "Auto-answer" on page 52) and set
the phone to normal sounds (see "Ringer mode"
on page 49).
Use voice answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts "Incoming call from
(Name), answer?" Say "Yes" or press any key
End
except the key to answer. Say "No" and press
End
the key to silence the alert. Remain silent.
The voice alert repeats twice and the phone rings
once, then returns to the home screen.
Voice wake-up
You can set your phone to make a call using
a headset.
Enable voice wake-up
Menu Settings Voice Features
Select > >
Voice Wake-Up With Accessory
>
Use voice wake-up
To wake up the phone:
1. Say "Wake Up" and listen for a tone.
2. Say "Wake Up" again until you hear
two tones.
User Guide
If the phone does not recognize your Wake Up
command, see "Voice training" on page 51.
>
Voice training
If your phone is having trouble recognizing
your voice, you can train by speaking
number commands.
1. Select
Menu
Voice Training
2. Read the message and select
3. Select
Train Numbers
4. Read the message and select
5. Follow the prompts displayed on the
screen. Speak each number until training
is complete.
To untrain your phone select
Voice Features
Untrain Numbers

Accessories

This section describes settings that affect
accessories you use with your phone.
>
Headset sounds
.
When a headset is attached to your phone, the
ringer can be played through the headset or
phone speaker. Select
Accessories
>
the following:
•
Out of phone
•
Out of headset
Settings Voice Features
> > >
.
OK
.
.
OK
.
Menu Settings
> >
Voice Training OK
> > >
.
Menu Settings
> >
Headset Sounds
and one of
rings from the phone speaker.
rings from the headset.
51