Setting The Test Tone; Setting The Audio - Samsung HT-TX52 Instruction Manual

Settings
(Con't)

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
ENTER button.
MOVE ENTER RETURN EXIT
The test tone will be sent to L
If the ENTER button is pressed again at this time, the test tone will stop.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
STOP EXIT
Alternative method: press the TEST TONE button on the remote.
Multi-Channel Pro Logic Mode
Press the TEST TONE button.
Start
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
48
button to move to <Audio> and then press the ENTER button.
button to move to <TEST TONE> and then press the
C R SR SL SW in order.
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected and that there is
no problem.
When HDMI AUDIO is on (audio is produced through TV speakers),
the TEST TONE function is not available.
To end the test tone, press the TEST TONE button again.

Setting the Audio

You can adjust the balance and level for each speaker.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
the ENTER button.
4
MOVE ENTER RETURN EXIT
Press the Cursor
Press the Cursor
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE CHANGE RETURN EXIT
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor
Adjusting Front/Rear Speaker Balance
• You can select between 00, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
button to move to <Audio> and then press the ENTER button.
button to move to <SOUND EDIT> and then press
, button to select and adjust the desired item.
, button to adjust the settings.
, button.
ENG
49