Before Using Your Home Theater; Disc Playback - Samsung HT-DT79 Instruction Manual

Before Using Your Home Theater

Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.
To Operate your Samsung TV and the Home Theater with the HT-DT79's Remote Control
Plug the main unit's
1
power cord into the
AC power supply.
Press the POWER
3
button to turn on
your Samsung TV
with this remote.
Press DVD RECEIVER
5
button to switch to
DVD RECEIVER
mode.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric
Note
17
(0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
See page 61 for more information about remote control operation with other manufacturer's TVs.
2 Press TV button to
set the remote to TV
mode.
Press TV/VIDEO
4
button to select
VIDEO mode on
your TV.
VIDEO
Press FUNCTION button
6
on the main unit or DVD
button on the remote to
enable DVD/CD playback.

Disc Playback

1
Press OPEN/CLOSE button to open the
disc tray.
2
Load a disc.
•
Place a disc gently into the tray with the disc's label
facing up.
3
Press DISC SKIP button.
• Rotate the carousel tray so you can load the first ,
the second, the third discs.
4
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD
• Playback starts automatically.
•
Depending on the content of the disc, the initial screen may appear different.
Note
CD
18
GB