Advertisement
Twill Replace-a-top™ with Tinted Windows – Installation Instructions
Install Top Fabric
Raise the bow assembly and lock the header to the
windshield.
Drape the top fabric, backing side up, over the hood
and windshield. Slide the extrusion along the front
edge of the top into the channel in the lower header.
Line up the center notch in the fabric with the center
notch in the header. Use masking tape to help hold
the fabric in place along the lower header.
Top Fabric - Backing
Side Up
Slide Extrusion along
the Front Edge of the
Channel
Line up the Center
Notch in the Fabric with
the Center Notch in the
Header
Rev. C 0314
Install Top Fabric
Close the upper header over the fabric, sandwich-
ing the fabric. Reinstall the four (4) corner screws.
Then install the nineteen (19) screws across the
header.
Lower the bow assembly to the rear of the vehicle.
Reinstall Corner
Screws
Install Corner Screws
Wrap the fabric around the header and raise the
header slightly to work the pockets in the fabric
over the corners of the header. Install the screws
removed in Step 6 in each corner to secure the
fabric to the header.
Install Screws
Install Screws
Across Header
79837 pg. 4
Advertisement
