Advertisement
Twill Replace-a-top™ with Tinted Windows – Installation Instructions
Parts List
Fabric Top
Quarter Window, Right
Quarter Window, Left
Rear Window
Elastic Garter
Remove Quarter Windows and
Rear Window
Remove the Quarter Windows and the Rear
Window. Remove the metal Tailgate Bar from the
bottom of the Rear Window and set it aside.
Release the plastic strip sewn to the top above the
doors. Pull down and out to slip the plastic out of the
channel.
Release Plastic Strips
from Retainers
Rev. C 0314
Qty - 1
Qty - 1
Qty - 1
Qty - 1
Qty - 2
Release Windshield Latches
Release the latch that secures the header to the wind-
shield. Pull up on the lever and then down and out to
release the hook from the loop in the windshield frame.
Header Latch
Windshield
Frame
Pull lever up
Windshield
Release hook
from loop
Release Rear Corners
Release the rear corners of the top. Pull gently
down and then out to release the plastic strip from
the retainer on the vehicle.
Pull down and then out
to release the fabric from
the retainer
Release Rear 2 Bows
Use a phillips screwdriver to remove the four
screws that attach the fl aps in the top to the two
Rear Bows. Set the screws aside to be reused
later. Allow the bows to drop onto the tailgate.
Unscrew the fabric
from the rear bows
View from inside vehicle
Rear Window
Opening
79837 pg. 2
Advertisement
