Bestop Twill Replace-a-top Installation Instructions Manual page 3

Twill Replace-a-top™ with Tinted Windows – Installation Instructions
Unfasten Center Bows
Unfasten the hook and loop fl aps around the Bows
on each side of the sport bar.
Unfasten hook and
loop to unwrap fl ap
Sport Bar
View from inside vehicle
Unfasten hook and
loop to unwrap fl ap
View from inside vehicle
Rear Window Opening
Rev. C 0314
Bow in front
of Sport Bar
Bow behind
Sport Bar
Remove Header Screws
Collapse the bow assembly down onto the tailgate.
With the bow assembly laying on the tailgate, remove
the screws that fasten the fabric to the corners of the
lower header. Set the screws aside for use in install-
ing the new fabric.
Remove Top Fabric
Raise the bow assembly and lock the header to the
windshield.
Drape the top fabric, backing side up, over the hood
and windshield. Remove the nineteen (19) screws
that secure the fabric to the upper and lower head-
ers. Set the screws aside for use in installing the
new top. Slide the extrusion along the front edge of
the top out of the channel in the lower header and
remove the old top from the vehicle.
Top Fabric - Backing
Side Up
Slide Extrusion along
the Front Edge of the
Remove
Screws Channel to remove
Top
Remove Screws (19)
Across Header
79837 pg. 3