Advertisement
Cloud Camera User Manual
2.1. hardware interface connection diagram：
I/O alarm input (G, IN): the corresponding alarm input port connected to external alarm probe (such as
magnetometer, infrared, smoke feeling alarm probe) must be an alarm probe normally open type. When alarm
occurs when the switch is closed, the probe, triggering the network video alarm, and according to the user setting
function of alarm; the "G" interface connected with an external probe public end, "signal end IN" interface
connected with an external probe.
I/O alarm output (1A, 1B): 1) the corresponding alarm output port is connected with the external alarm equipment
(such as the alarm loudspeaker, sound and light alarm equipment, alarm equipment required) is normally open
type, when alarm occurs, the user sets the alarm output port I/O, camera alarm outlet switch is closed, the trigger
external alarm equipment; 2) alarm output is just a role switch, no level. The user protection, no alarm, 1A, 1B
two interface is "off" state, when the alarm output, 1A, 1B two interface will be "closed" state. Power two
interface alarm output alarm device can control the on / off to achieve the alarm.
Note: the alarm output a maximum voltage and current with 120V AC/1A or 24V DC/1A.
2.2. Wall or ceiling installation:
A) Choose the suitable wall or ceiling as installation location.
The mounting bracket has two circular mounting holes.
Equipped with a screw and by a suitable tool, the mounting bracket
Fixed to the wall or ceiling.
2.
installation
5
Advertisement
