Philips EasySense Design Manual page 14

Luminaire-mount. single, compact, cost-effective luminaire control

Hide thumbs Also See for EasySense:

Table of Contents

Design-in Guide - Philips EasySense luminaire-mount sensors

3. After hearing a beep, the following screen

shall show up in order to configure parameters.

Most parameters can be configured using the

sliding bar or key in the exact number on the right.

After configuration, press "Confirm."

4. The app also provides an option to save this

profile for future use by entering a profile name

and location. The user can skip entering this

information and program the EasySense sensor

by pressing "Program EasySense."

5. Repeat step 2.

6. After programming successfully, a green arrow

shows on the screen. More sensors can be

programmed with the same setting by pressing

"Program EasySense" again. Or press "Done"

to finish configuration.

May 2016

Table of Contents