Electrolux GK69TCIO User Manual page 8

8 electrolux
Power Management
The cooking zones of the cooking surface
have a maximum power.
The maximum power is reached when the
heat setting 13 has been set for all cooking
zones.
Two cooking zones generate a pair (see fig-
ure) and therefore, the power management
shares the maximum available power be-
tween these cooking zones.
Using the timer
Function
Automatic cut-out
Countdown timer
If just one countdown value is set you
can change it only when the appliance is
switched on.
If a heat setting is set on this cooking
zone in addition to a countdown timer,
Selecting a cooking zone
Step Control panel
1.
Touch once
2.
Touch once
3.
Touch once
4.
Touch once
Condition
a heat setting is set
cooking zones not in use
Pilot light of the first cooking zone flashes
Pilot light of the second cooking zone flashes
Pilot light of the third cooking zone flashes
Pilot light of the fourth cooking zone flashes
When the power function is selected for one
cooking zone, the power management
makes the additional power for this cooking
zone available by reducing the power of the
corresponding other cooking zone.
Example: the heat setting 13 is selected on
one cooking zone. The power function is
switched on for the corresponding cooking
zone. The power function is carried out but
the heat setting 13 of one of the cooking
zones and the power function for the other
cooking zone of the pair exceed the maxi-
mum power for both at the same time. For
this purpose, the power management re-
duces the power of the cooking zone that
switched on first from 13 to example 5 and
the display of this cooking zone changes be-
tween 13 and 5 and then stays at the current
possible maximum 5 (If the display changes
between 13 and 5 or 13 and 3 or another
value depends on the type of appliance and
the size of the cooking zone).
Outcome after the time has
acoustic signal
00
flashes
Cooking zone switches off
acoustic signal
00
flashes
the cooking zone is switched off after the
time set has elapsed.
If a cooking zone is switched off, the tim-
er function set is also switched off.
Display
elapsed