Connecting External Components
Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR or TV.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
3
Press AUX on the remote control to select 'DIGITAL IN / AUX1 / AUX 2'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
Note
•
If you have connected an external digital component and an Analog component to Video In (1, 2) at the
same time, there will be video from AUX 1 even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to 1, connect Video In to 1. If you have connected Audio In (L, R)
to 2, connect Video In to 2.
•
When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
DIGITAL IN
Optical Cable
(not included)
DIGITAL OUT
AUX 1
AUX1
AUX2
FM
AM.
AUX 2.
22