Rrss (Rear Reflecting Surround System) Setting - Samsung 2.0051111115925e16 Instruction Manual

RRSS (Rear Reflecting Surround System) Setting

Select the RRSS mode for sound similar to 5.1 channel sound when rear speakers are used in the
front as reflectors.
Press the MODE
1
(RRSS/SDSM) button
of the main unit to
select RRSS.
•
Each time you press this button,
RRSS and SDSM will be repetitively
selected on the display.
RRSS (Rear Reflecting Surround System) Speaker Configuration
In this setup, the rear speakers reflect sound first against the side walls
(or ceiling) and then against the rear wall.
•
Since you don't have to separately install the rear speakers, it not only
enhances space efficiency, but also eliminates the need to arrange additional
speaker wires.
•
You can install the speakers on stands or a wall. Make sure to angle the rear
speakers so that sound is reflected against the side walls.
(The Rear speakers can turned to the right and left.)
69
Press the ASC
2
button to select
REAR
REFLECTING ON.
•
To release, press the ASC button
again to select REAR REFLECTING
OFF.