Table of Contents
Advertisement
I300handsfree.book Page 5 Wednesday, October 24, 2001 10:22 AM
•
•
4. Put the cradle on the lower clamshell. Adjust the
mounting angle, and tighten the two large slotted
screws.
Hands
free
box
4
3
2
1
1. Choose a suitable mounting location for the
Hands-free box.
The location must not interfere with the driver's
safe operation of the vehicle.
2. Drill the pilot holes using a drill bit, and install the
mounting bracket by using the screws supplied.
Tighten the screws firmly to prevent them from
working loose due to the vibration of a moving
vehicle.
Cradle
Upper
clamshell
Large
slotted
screw
Lower
clamshell
Vehicle
5
Advertisement
Table of Contents
