Samsung SyncMaster 400UXn User Manual page 26

16. SOURCE
17. INFO
18. EXIT
19. Up-Down Left-Right but-
tons
20. S.MODE
21. STILL
22. FM RADIO
23. P.SIZE
24. SRS
25. DUAL/MTS
26. PIP
27. SOURCE
28. SWAP
Introduction
- This fuction does not work for this LCD Display.
Changes the video source.
The current picture information is displayed in the top left corner
of the screen.
Exits from the menu screen.
Moves from one menu item to another horizontally, vertically or
adjusts selected menu values.
When pressing this button, the current mode is displayed at the
bottom centre of the screen. The LCD Display has a built-in high
fidelity stereo amplifier. Then press the button again to circle
through available preconfigured modes. ( Standard → Music
→ Movie → Speech → Custom )
Press the button once to freeze the screen. Press it again to un-
freeze.
Turns the FM Radio on/off. In PC/DVI mode, sets the SOUND
to FM Radio. In general Video mode, selects FM Radio, and turns
off the screen. In areas where the signal is weak, noise may occur
during FM radio broadcasts.
- This fuction does not work for this LCD Display.
Press to change the screen size.
SRS
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type
FM Stereo Mono
Stereo
SAP
- This fuction does not work for this LCD Display.
Every time you press the button, a PIP screen appears.
Changes the source of the PIP window signal.
Swaps the contents of the PIP and main image. The image in the
PIP window will appear on the main screen, and the main screen
image will appear in the PIP window.
MTS/S_Mode Default
Mono Manual Change
Mono ↔ Stereo
Mono ↔ SAP Mono