GET only.
REMARKS
Yes, GET only. The A440 can issue the command both remotely and locally.
REMOTE
EXAMPLE
INFO
193 INFO 255 0 18/4/1999 21:5:11 1.3 0 0 0 91 72 40 1:46 58 65 72 3 900 15 0
#
RX
Switches the unit to permanent receive mode (for tuning purposes).
DESCRIPTION
None.
PARAMETERS
Nothing.
RETURNS
The system stops, and exits the command only when a key is pressed. This com-
REMARKS
mand returns no message.
No.
REMOTE
EXAMPLE
RX
193 RX 0
#
TX
Switches the unit to transmit mode (for tuning purposes).
DESCRIPTION
• days_uptime in days; together with hr:min_uptime, it represents the
amount of time the device is up without a reset or watchdog
• hr:min_uptime in hours:minutes format
• rssi as decimal (
unsigned chars
command
• pmp_low and pmp_high are the programmed values with the PMP com-
mand
• type is used to represent the device type; following types are assigned cur-
rently:
— 0 for A730MD
— 1 for A720
— 2 for A730SD
— 3 for A720B
— 4 for A733
— 5 for A723
— 6 for A440
• slot and samples are the actual values programmed by means of the SLOT
command
• err_level is the error value; 0 means no error
); it is the programmed value with the RSSI
Commands
55