Samsung Series 9 User Manual page 7

Supported modes for HDMI / DVI and Component.
N
HDMI / DVI 50Hz
HDMI / DVI 60Hz
Component
4 ANT IN
- To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
aerial / A cable television network / A satellite network
5 S-VIDEO IN
- Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect the audio cables to AV IN [R-AUDIO-L].
6 COMMON INTERFACE SLOT
- When not inserting 'CI CARD' in some channels, 'Scrambled Signal' is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your service provider.
- When the channel information configuration has finished, the message 'Updating Completed' is displayed, indicating that the
channel list is now updated.
You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
N
hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
N
The place of the COMMON INTERFACE Slot may be different depending on its model.
N
7 WISELINK
- Connect a USB mass storage device to view movies and photos and listen to music files.
- You can connect to Samsung's network wirelessly using the 'Samsung Wireless LAN Adapter' (Sold separately).
8 AV IN
- Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V
device.
9 DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio
N
only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable / Satellite Box directly to
an Amplifier or Home Theater, not the TV.
0 EXT , EXT 2
Connector
Video
EXT 1 O
EXT 2 O
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
! LAN
- Connect a LAN cable to this port to connect to the Network.
@ SERVICE
- Connector for Service only.
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your
remote control.
# KENSINGTON LOCK (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the Kensington Lock may be different depending on its model.
480i 480p
X X
X O
O O
Input
Audio (L / R) RGB
O O
O
English - 
576i 576p
X O
X X
O O
Output
Video + Audio (L / R)
Only TV or DTV output is available.
Output you can choose.
720p 1080i 1080p
O O
O O
O O
O
O
O