Setting Up Anynet; Scanning And Switching Between Anynet + Devices - Samsung PS50A550 User Manual

Setting Up Anynet +

The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the
ENTER button.
 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then
press the ENTER button.
 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),
then press the ENTER button.
5 Press the ▲ or ▼ button to select On, then press the
ENTER button.
➢
The Anynet+ (HDMI-CEC) function is enabled.
➢
If you select Off, Anynet+ (HDMI-CEC) is disabled.
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
4 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
5 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.
➢
The Auto turn off function is enabled.
➢
If you select No, the Auto turn off function is canceled.
Press the EXIT button to exit.
➢
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
➢
If you set Auto Turn Off to Yes, connected external devices are
also turned off when the TV is turned off. However, if the device
is recording, it may not be turned off.
➢
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Scanning and Switching between Anynet + Devices

1 Press the MENU button to display the menu. Press the ▲ or ▼
button to select Input, then press the ENTER button.
 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then
press the ENTER button.
 Press the ▲ or ▼ button to select Select Device, then press
the ENTER button.
4 Press the ▲ or ▼ button to select to a particular device and
press the ENTER button.
It is switched to the selected device.
5 If you cannot find a device you want, press the ▲ or ▼ button to
select Searching Connections, then press the ENTER button.
The meassage Configuring Anynet+ connection is
displayed. When searching devices completes, the connected
devices are listed in the Anynet+ menu.
➢
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the operation during the switching operation.
➢
The time required to scan for devices is determined by the
number of connected devices.
➢
When the device scan is complete, the number of found
devices is not displayed.
➢
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select Searching Connections menu to search devices.
➢
If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
TV
TV
English - 41
P 1
View TV
Select Device

Record 
Menu on Device

Device Operation

Receiver :Off

Setup

Move
Enter
Return
Setup
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Move Enter
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : : Off
Searching Connections
Move Enter
P 1
View TV
DVDR1
Select Device

DVDR
DVD1
Record

DVD
Menu on Device

Device Operation

Receiver :Off

Setup

Move Enter
Return
Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off : Yes
Searching Connections
Move Enter
Continued...
Off
On
Return
No
Yes
Return



Return