How To Assemble The Stand-Base (Depending On The Model) - Samsung PS50A550 User Manual

Moving to the remembered position
1 Complete Step 1 of Entering the menu.
 Pressing a Color (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
You can move the wall mount to one of the 3 pre-set positions
➢
by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the
➢
position display will disappear.
For installation, refer to the Installation Manual provided with the wall
➢
mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
➢
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
➢
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.
➢
42 inches model is not compatible with the older wall mount model (WMN5090A).
➢
How to assemble the Stand-Base
Using the screws for securing the stand base and the monitor, firmly
attach the monitor to the stand base.
(The exterior of the set may be different from the picture.)
Warning
Firmly secure the stand to the TV before
moving it, as the stand may fall and could
cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the floor
because of possible damage to the
screen.
Always store the TV upright.
English - 4
Wall-Mount Adjustment
Position 1
►
►
Position
Adjust
(depending on the model)
In case of installing your
TV on the wall, close the
cover (1) on the stand-base
connection part using two
screws for hiding.
►
►
1 2 3
Save Center