Basic Operation; Selecting Ranges - Radio Shack 2200813 User Manual

Basic Operation

Selecting Ranges

Set the meter to a measurement range; the unit of measure
appears on the display. For example, mV appears in the 400
mV range.
Note the position of the decimal:
• If 0.000V appears, the meter is set to measure less than
4 volts.
• If 000 V appears, the meter is set to measure up to 600
volts.
Read the range in volts, amps, or ohms as indicated by the
position of the decimal point.
Range
400 mV
40 mA
400 mA
400 Ω
40 kΩ
400 kΩ
40 MΩ
"d" denotes any digit from
9
Display
ddd.d mV
4 V
d.ddd V
40 V
dd.dd V
400 V
ddd.d V
600 V
ddd V
dd.dd mA
ddd.d mA
4 A
d.ddd A
10 A
dd.dd A
ddd.d Ω
4 kΩ
d.ddd kΩ
dd.dd kΩ
ddd.d kΩ
4 MΩ
d.ddd MΩ
dd.dd MΩ
0 to 9.