Special Panel Markings - Radio Shack 2200813 User Manual

Special Panel Markings

The maximum voltage that this meter can measure is 600V RMS AC or 600V
600V
DC. To avoid electric shock and damage to the meter, do not connect the
MAX
two input terminals (-COM and +V.Ω.mA) to any source that exceeds 600
volts with respect to ground.
The maximum current that this meter can measure at this jack is 400mA DC or
400mA
MAX
AC.
Caution: RISK OF ELECTRIC SHOCK! Refer to the complete operating
instructions.
Caution: Be extremely careful when taking high-voltage measurements. DO
NOT TOUCH TERMINALS OR TEST LEAD ENDS.
CAT II This equipment is rated for installation category II (3600 VA max.).
10A MAX. The maximum current you can measure at this jack is 10 amps DC/AC. This
UNFUSED
jack is not fuse-protected.
The meter is protected by double insulation.
n
Note: The UL mark does not indicate that this product has been evaluated by
Underwriters Laboratories for the accuracy of its readings.
7