Advertisement
Advertisement
Table of Contents
Related Manuals for Westwood Design HAYDEN
Summary of Contents for Westwood Design HAYDEN
- Page 1 HAYDEN Toddler Guard Rail Assembly Instructions...
- Page 2 PARTS OR SHARP EDGES BEFORE ASSEMBLY AND PERIODICALLY DURING USE. DO NOT USE CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT WESTWOOD DESIGN: 635 N. BILLY MITCHELL RD., STE. B, SALT LAKE CITY, UTAH 84116, PHONE: 1-908-719-4707; EMAIL: SUPPORT@WESTWOODBABY.COM FOR...
- Page 3 Required Parts & Hardware Day Bed Cap (Left) Day Bed Cap (Right) Allen Wrench Step 1: Remove the 4 bolts attaching the footboard to the bottom support using the allen wrench provided. Step 2: Remove the 4 bolts from the crib end attaching the footboard using the allen wrench provided.
- Page 4 Required Parts & Hardware Step 4: Use the 4 (M6 x 60mm) Allen bolts and attach the guard rail into the Day Bed Cap with Allen wrench provided. Step 5: Using the 4 bolts previously removed from the bottom of the footboard and tighten the guard rail into the bottom support with Allen wrench.
- Page 5 - Your crib has a durable and protective non-toxic finish. However, if you decide to refinish it, you must use a non-toxic finish specified for children’s products. Do not use any toxic stripping methods to remove the old finish. westwood design 635 N. Billy Mitchell Rd., Ste. B Salt Lake City, UT 84116 Phone: 908-719-4707 www.westwoodbaby.com...
Need help?
Do you have a question about the HAYDEN and is the answer not in the manual?
Questions and answers